Medical Packaging Bottle Cap

Reliable good quality and very good credit standing are our principles, which will help us at a top-ranking position. Adhering to your tenet of "quality 1st, purchaser supreme" for Medical Packaging Bottle Cap, Milk Bottle Caps, Hdpe Bottle Caps Mould, Engine Oil Cap Mould, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success! We've been committed to offering easy,time-saving and money-saving one-stop purchasing support of consumer for Medical Packaging Bottle Cap, Further, we are supported by highly experienced and knowledgeable professionals, who have immense expertise in their respective domain. These professionals work in close coordination with each other to offer our clients an effective range of products.


  • Factory wholesale Bottle Capping Machine - 16CAV Cream lid mould, hot runner,unscrew – Mingsanfeng

    Factory wholesale Bottle Capping Machine - 16CAV Cream lid mould, hot runner,unscrew – Mingsanfeng

    1, Mould base is made of LKM frame, and HASCO standard frame, all components are with DME or  HASCO standard. 2, We have a wide useage of mold steel, both local and improted, 50C, P20,420H,2083,2344, S136,  from ASSAB, LKM,etc.heat treatment to HRD 48~52 HRC, nitried all sliders and inserts, use Berylium Copper in corners to improve cooling. 3, We supply 2D mold drawing 2D/3D cap drawing and details layout. 4, We make cold runner mold, hot runner mold(Husky,Moldmaser,DME and YUDO), etc. Our e...
  • Factory wholesale Tip Cap - 16CAV Shampoo flip top cap mould with in mould closing(IMC),hot runner ,push out – Mingsanfeng

    Factory wholesale Tip Cap - 16CAV Shampoo flip top cap mould with in mould closing(IMC),hot runner ,push out – Mingsanfeng

    1, Mould base is made of LKM frame, and HASCO standard frame, all components are with DME or  HASCO standard. 2, We have a wide useage of mold steel, both local and improted, 50C, P20,420H,2083,2344, S136,  from ASSAB, LKM,etc.heat treatment to HRD 48~52 HRC, nitried all sliders and inserts, use Berylium Copper in corners to improve cooling. 3, We supply 2D mold drawing 2D/3D cap drawing and details layout. 4, We make cold runner mold, hot runner mold(Husky,Moldmaser,DME and YUDO), etc. Our e...
  • Good quality Bottle Cap - 16CAV D48mm Tube flip top cap mould, hot runner,unscrew – Mingsanfeng

    Good quality Bottle Cap - 16CAV D48mm Tube flip top cap mould, hot runner,unscrew – Mingsanfeng

    1, Mould base is made of LKM frame, and HASCO standard frame, all components are with DME or  HASCO standard. 2, We have a wide useage of mold steel, both local and improted, 50C, P20,420H,2083,2344, S136,  from ASSAB, LKM,etc.heat treatment to HRD 48~52 HRC, nitried all sliders and inserts, use Berylium Copper in corners to improve cooling. 3, We supply 2D mold drawing 2D/3D cap drawing and details layout. 4, We make cold runner mold, hot runner mold(Husky,Moldmaser,DME and YUDO), etc. Our e...
  • Milk Can Lid - 48CAV Hanger mould,hot runner,push out – Mingsanfeng

    Milk Can Lid - 48CAV Hanger mould,hot runner,push out – Mingsanfeng

    1, Mould base is made of LKM frame, and HASCO standard frame, all components are with DME or  HASCO standard. 2, We have a wide useage of mold steel, both local and improted, 50C, P20,420H,2083,2344, S136,  from ASSAB, LKM,etc.heat treatment to HRD 48~52 HRC, nitried all sliders and inserts, use Berylium Copper in corners to improve cooling. 3, We supply 2D mold drawing 2D/3D cap drawing and details layout. 4, We make cold runner mold, hot runner mold(Husky,Moldmaser,DME and YUDO), etc. Our e...
  • Best Price for Shower Gel Bottle Cap - 16CAV D30mm Powder flip top cap in mould closing(IMC) mould, hot runner,push out – Mingsanfeng

    Best Price for Shower Gel Bottle Cap - 16CAV D30mm Powder flip top cap in mould closing(IMC) mould, hot runner,push out – Mingsanfeng

    1, Mould base is made of LKM frame, and HASCO standard frame, all components are with DME or  HASCO standard. 2, We have a wide useage of mold steel, both local and improted, 50C, P20,420H,2083,2344, S136,  from ASSAB, LKM,etc.heat treatment to HRD 48~52 HRC, nitried all sliders and inserts, use Berylium Copper in corners to improve cooling. 3, We supply 2D mold drawing 2D/3D cap drawing and details layout. 4, We make cold runner mold, hot runner mold(Husky,Moldmaser,DME and YUDO), etc. Our e...
  • Hot Sale for Detergent Cap - 16CAV D48mm Tube flip top cap mould, hot runner,unscrew – Mingsanfeng

    Hot Sale for Detergent Cap - 16CAV D48mm Tube flip top cap mould, hot runner,unscrew – Mingsanfeng

    1, Mould base is made of LKM frame, and HASCO standard frame, all components are with DME or  HASCO standard. 2, We have a wide useage of mold steel, both local and improted, 50C, P20,420H,2083,2344, S136,  from ASSAB, LKM,etc.heat treatment to HRD 48~52 HRC, nitried all sliders and inserts, use Berylium Copper in corners to improve cooling. 3, We supply 2D mold drawing 2D/3D cap drawing and details layout. 4, We make cold runner mold, hot runner mold(Husky,Moldmaser,DME and YUDO), etc. Our e...
  • Manufacturing Companies for Drinks Products Cap - 16CAV D30mm Powder flip top cap in mould closing(IMC) mould, hot runner,push out – Mingsanfeng

    Manufacturing Companies for Drinks Products Cap - 16CAV D30mm Powder flip top cap in mould closing(IMC) mould, hot runner,push out – Mingsanfeng

    1, Mould base is made of LKM frame, and HASCO standard frame, all components are with DME or  HASCO standard. 2, We have a wide useage of mold steel, both local and improted, 50C, P20,420H,2083,2344, S136,  from ASSAB, LKM,etc.heat treatment to HRD 48~52 HRC, nitried all sliders and inserts, use Berylium Copper in corners to improve cooling. 3, We supply 2D mold drawing 2D/3D cap drawing and details layout. 4, We make cold runner mold, hot runner mold(Husky,Moldmaser,DME and YUDO), etc. Our e...
  • Hot Sale for Detergent Cap - 16CAV Cream lid mould, hot runner,unscrew – Mingsanfeng

    Hot Sale for Detergent Cap - 16CAV Cream lid mould, hot runner,unscrew – Mingsanfeng

    1, Mould base is made of LKM frame, and HASCO standard frame, all components are with DME or  HASCO standard. 2, We have a wide useage of mold steel, both local and improted, 50C, P20,420H,2083,2344, S136,  from ASSAB, LKM,etc.heat treatment to HRD 48~52 HRC, nitried all sliders and inserts, use Berylium Copper in corners to improve cooling. 3, We supply 2D mold drawing 2D/3D cap drawing and details layout. 4, We make cold runner mold, hot runner mold(Husky,Moldmaser,DME and YUDO), etc. Our e...
  • Doctor Cap - 48CAV Hanger mould,hot runner,push out – Mingsanfeng

    Doctor Cap - 48CAV Hanger mould,hot runner,push out – Mingsanfeng

    1, Mould base is made of LKM frame, and HASCO standard frame, all components are with DME or  HASCO standard. 2, We have a wide useage of mold steel, both local and improted, 50C, P20,420H,2083,2344, S136,  from ASSAB, LKM,etc.heat treatment to HRD 48~52 HRC, nitried all sliders and inserts, use Berylium Copper in corners to improve cooling. 3, We supply 2D mold drawing 2D/3D cap drawing and details layout. 4, We make cold runner mold, hot runner mold(Husky,Moldmaser,DME and YUDO), etc. Our e...
  • Good quality Bottle Cap - 32CAV Soy sauce flip top cap mould, hot runner, push out – Mingsanfeng

    Good quality Bottle Cap - 32CAV Soy sauce flip top cap mould, hot runner, push out – Mingsanfeng

    1, Mould base is made of LKM frame, and HASCO standard frame, all components are with DME or  HASCO standard. 2, We have a wide useage of mold steel, both local and improted, 50C, P20,420H,2083,2344, S136,  from ASSAB, LKM,etc.heat treatment to HRD 48~52 HRC, nitried all sliders and inserts, use Berylium Copper in corners to improve cooling. 3, We supply 2D mold drawing 2D/3D cap drawing and details layout. 4, We make cold runner mold, hot runner mold(Husky,Moldmaser,DME and YUDO), etc. Our e...
  • Shampoo Bottle Cap - 4CAV Wet tissue flip top cap mould, hot runner,push out – Mingsanfeng

    Shampoo Bottle Cap - 4CAV Wet tissue flip top cap mould, hot runner,push out – Mingsanfeng

    1, Mould base is made of LKM frame, and HASCO standard frame, all components are with DME or  HASCO standard. 2, We have a wide useage of mold steel, both local and improted, 50C, P20,420H,2083,2344, S136,  from ASSAB, LKM,etc.heat treatment to HRD 48~52 HRC, nitried all sliders and inserts, use Berylium Copper in corners to improve cooling. 3, We supply 2D mold drawing 2D/3D cap drawing and details layout. 4, We make cold runner mold, hot runner mold(Husky,Moldmaser,DME and YUDO), etc. Our e...
  • OEM/ODM China Snap Cap - 16CAV D30mm Powder flip top cap in mould closing(IMC) mould, hot runner,push out – Mingsanfeng

    OEM/ODM China Snap Cap - 16CAV D30mm Powder flip top cap in mould closing(IMC) mould, hot runner,push out – Mingsanfeng

    1, Mould base is made of LKM frame, and HASCO standard frame, all components are with DME or  HASCO standard. 2, We have a wide useage of mold steel, both local and improted, 50C, P20,420H,2083,2344, S136,  from ASSAB, LKM,etc.heat treatment to HRD 48~52 HRC, nitried all sliders and inserts, use Berylium Copper in corners to improve cooling. 3, We supply 2D mold drawing 2D/3D cap drawing and details layout. 4, We make cold runner mold, hot runner mold(Husky,Moldmaser,DME and YUDO), etc. Our e...